{"title":"Opto 22","description":"\u003cp\u003eOpto 22 was founded in 1974 in Southern California by engineer Bob Engman, starting with 22 optically isolated solid-state relays. In 1978 the company developed the first plug-in I\/O modules and created the color code still used to identify them: yellow for AC input, black for AC output, white for DC input and red for DC output. Opto 22 remains privately held and engineer-run, designing and building its products at its factory in Temecula, California. This collection carries Opto 22 standard-series and G4 Series digital I\/O modules, including DC and AC input and output modules, as used and surplus inventory for industrial automation and control repair. Fast shipping from American Industrial Parts Group.\u003c\/p\u003e","products":[{"product_id":"opto-22-g4iac5-ac-input-module-120vac-5v-logic-g4-i-o-90-140vac-used","title":"Opto 22 G4IAC5 AC Input Module 120VAC 5V Logic G4 I\/O 90-140VAC Used","description":"ITEM SPECIFICS\u003cbr\u003eBrand: Opto 22\u003cbr\u003eModel: G4IAC5\u003cbr\u003eMPN: G4IAC5\u003cbr\u003eSeries: G4\u003cbr\u003eType: Digital AC\/DC Input Module\u003cbr\u003eNominal Input Voltage: 120 VAC\u003cbr\u003eInput Voltage Range: 90–140 VAC or VDC\u003cbr\u003eInput Current: 5 mA at maximum line\u003cbr\u003eOff-State Input Allowed: 3 mA, 45 V\u003cbr\u003eInput Resistance: 28 kΩ\u003cbr\u003eLogic Voltage: 5 VDC nominal (4.5–6 VDC range)\u003cbr\u003eLogic Supply Current: 12 mA\u003cbr\u003eOutput: Open-collector transistor, 50 mA max (sinking)\u003cbr\u003eOutput Voltage Drop: 0.4 V at 50 mA\u003cbr\u003eOutput Leakage: 100 µA at 30 VDC (no input)\u003cbr\u003eTurn-On \/ Turn-Off Time: 20 ms \/ 20 ms\u003cbr\u003eIsolation: 4000 Vrms input to output\u003cbr\u003eControl Resistance (Rc): 220 Ω\u003cbr\u003eOperating Temperature: -30°C to +70°C\u003cbr\u003eStorage Temperature: -30°C to +85°C\u003cbr\u003eStatus Indicator: Built-in LED\u003cbr\u003eCertifications: UL Recognized, CSA\u003cbr\u003eColor: Yellow (Opto 22 AC input color code)\u003cbr\u003eCondition: Used\u003cbr\u003eQuantity: 1\u003cbr\u003e\u003cbr\u003eDESCRIPTION\u003cbr\u003eUsed Opto 22 G4IAC5 G4 Series digital AC input module, rated 120 VAC input with 5 volt logic. The front reads \"G4 IAC5, Input 120 VAC, 5 Volt Logic, Opto 22,\" with UL Recognized and CSA marks. The back carries a factory stamp reading \"200% TESTED 1292 1730.\" The hold-down screw, status LED and pins are intact. Surface dust, light marks and minor discoloration on the yellow housing, as pictured.\u003cbr\u003eThe G4IAC5 detects on\/off AC or DC voltage from 90 to 140 V and passes it to a 5 VDC logic system through 4000 Vrms optical isolation. Input filtering and a hysteresis amplifier give a clean logic signal from noisy field voltages. Use it to monitor push buttons, limit switches, motor starter auxiliary contacts and other 120 VAC devices. The module plugs into Opto 22 G4 I\/O mounting racks.\u003cbr\u003e\u003cbr\u003eFeatures:\u003cbr\u003eSenses 90–140 VAC or VDC\u003cbr\u003e5 VDC logic (4.5–6 VDC range)\u003cbr\u003e4000 Vrms optical isolation, input to output\u003cbr\u003e20 ms turn-on and turn-off\u003cbr\u003eOpen-collector transistor output, 50 mA sinking\u003cbr\u003eInput filtering and hysteresis\u003cbr\u003eBuilt-in status LED\u003cbr\u003eHold-down screw for rack mounting\u003cbr\u003eUL Recognized, CSA\u003cbr\u003e\u003cbr\u003eCompatibility:\u003cbr\u003eDirect replacement for the Opto 22 G4IAC5 in G4 Series digital I\/O mounting racks. The G4IAC5A is the 240 VAC version (180–280 V) and is not a 120 VAC equivalent. For 15 or 24 VDC logic racks, use the G4IAC15 or G4IAC24 instead. The G4 series uses a different form factor from Opto 22's standard and SNAP I\/O modules, so confirm your rack type before ordering.\u003cbr\u003e\u003cbr\u003eQ\u0026amp;A\u003cbr\u003eQ: What does the G4IAC5 do?\u003cbr\u003eA: It detects a 90–140 V AC or DC signal and converts it to an isolated 5 VDC logic signal for a controller or PLC.\u003cbr\u003eQ: Can it sense DC voltage?\u003cbr\u003eA: Yes. Opto 22 rates the input at 90–140 VAC or VDC.\u003cbr\u003eQ: What is the difference between the G4IAC5 and the G4IAC5A?\u003cbr\u003eA: The G4IAC5 is for 120 V signals (90–140 V). The G4IAC5A is for 240 V signals (180–280 V). Both use 5 VDC logic.\u003cbr\u003eQ: How fast does it respond?\u003cbr\u003eA: 20 ms turn-on and 20 ms turn-off.\u003cbr\u003eQ: What logic voltage does it need?\u003cbr\u003eA: 5 VDC nominal, with a 4.5–6 VDC range. It draws 12 mA.\u003cbr\u003e\u003cbr\u003eDISCLAIMER\u003cbr\u003eItem is used, sold as pictured. Not tested beyond visual inspection. Ships fast with tracking. 30-day returns accepted; buyer pays return shipping.\u003cbr\u003e\u003cbr\u003eLEGAL DISCLAIMER\u003cbr\u003eWe are not an authorized distributor, reseller, or representative of Opto 22. All product names, trademarks, brands, and logos are the property of their respective owners. Products are sourced from surplus inventory and are not covered by manufacturer warranties.\u003cbr\u003e\u003cbr\u003eG4IAC5, G4 IAC5, Opto 22 G4IAC5, Opto22 G4IAC5, Opto 22 G4 input module, Opto 22 AC input module, G4 AC input module, 120VAC input module, 5V logic input module, AC input module, digital input module, I\/O module, input output devices, relay module, Opto 22 G4 rack module, PLC input module replacement, industrial control input module, G4IAC5A, G4IAC15, G4IAC24, G4OAC5, G4IDC5, Opto 22 I\/O repair, input not detecting replacement\u003cbr\u003e\u003cbr\u003eThank you for shopping with American Industrial Parts Group!","brand":"Opto 22","offers":[{"title":"Default Title","offer_id":49849648677019,"sku":"OPT-G4IAC5-U","price":14.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0767\/0857\/7435\/files\/opto-22-g4iac5-ac-input-module-120vac-5v-logic-g4-1-american-industrial-parts-group.png?v=1792386563"},{"product_id":"opto-22-g4oac5-ac-output-module-120vac-3a-5v-logic-g4-solid-state-i-o-used","title":"Opto 22 G4OAC5 AC Output Module 120VAC 3A 5V Logic G4 Solid State I\/O Used","description":"ITEM SPECIFICS\u003cbr\u003eBrand: Opto 22\u003cbr\u003eModel: G4OAC5\u003cbr\u003eMPN: G4OAC5\u003cbr\u003eSeries: G4\u003cbr\u003eType: Digital AC Output Module (Solid State)\u003cbr\u003eNominal Line Voltage: 120 VAC\u003cbr\u003eOperating Output Voltage Range: 12–140 VAC\u003cbr\u003eCurrent Rating: 3 A at 45°C; 2 A at 70°C\u003cbr\u003eUL Motor Load Rating: 1.5 A\u003cbr\u003eLogic Voltage: 5 VDC nominal (4–8 VDC range)\u003cbr\u003eLogic Input Current: 12 mA nominal\u003cbr\u003eControl Resistance: 220 Ω\u003cbr\u003eOne-Cycle Surge: 80 A peak\u003cbr\u003eOff-State Leakage: 5 mA RMS at 60 Hz\u003cbr\u003eMinimum Load Current: 20 mA\u003cbr\u003eSwitching: Zero-voltage turn-on, zero-current turn-off\u003cbr\u003eIsolation: 4000 V transient; 1500 V for 1 minute\u003cbr\u003eOperating Temperature: -30°C to +70°C\u003cbr\u003eStatus Indicator: Built-in LED\u003cbr\u003eFuse: Removable 4A 250V (installed)\u003cbr\u003eCertifications: UL Recognized, CSA\u003cbr\u003eCondition: Used\u003cbr\u003eQuantity: 1\u003cbr\u003e\u003cbr\u003eDESCRIPTION\u003cbr\u003eUsed Opto 22 G4OAC5 G4 Series digital AC output module, rated 120 VAC 3 A with 5 volt logic. The front reads \"G4 OAC5, Output 120 VAC 3 A, 5 Volt Logic, Opto 22,\" with UL Recognized and CSA marks. The back carries the factory \"200% TESTED 1192\" stamp. The removable fuse, marked 4A 250V, is installed, and the hold-down screw, status LED and pins are intact. Light surface dust and handling marks on the housing, as pictured.\u003cbr\u003e\u003cbr\u003eThe G4OAC5 is a solid-state output module that switches AC loads from 12 to 140 VAC under a 5 VDC logic signal. Zero-voltage turn-on and zero-current turn-off reduce electrical noise. The module plugs into Opto 22 G4 I\/O mounting racks.\u003cbr\u003e\u003cbr\u003eFeatures:\u003cbr\u003eSwitches 12–140 VAC loads\u003cbr\u003e3 A at 45°C, 2 A at 70°C\u003cbr\u003e5 VDC logic control (4–8 VDC range)\u003cbr\u003eZero-voltage turn-on, zero-current turn-off\u003cbr\u003e4000 V transient optical isolation\u003cbr\u003e80 A peak one-cycle surge rating\u003cbr\u003eBuilt-in status LED\u003cbr\u003eRemovable 4 A fuse\u003cbr\u003eHold-down screw for rack mounting\u003cbr\u003eUL Recognized, CSA\u003cbr\u003e\u003cbr\u003eCompatibility:\u003cbr\u003eDirect replacement for the Opto 22 G4OAC5 in G4 Series digital I\/O mounting racks. The G4OAC5A is the 240 VAC version and is not a 120 VAC equivalent. For 15 or 24 VDC logic, use the G4OAC15 or G4OAC24 instead. The G4 series uses a different form factor from Opto 22's standard and SNAP I\/O modules, so confirm your rack type before ordering.\u003cbr\u003e\u003cbr\u003eQ\u0026amp;A\u003cbr\u003eQ: What does the G4OAC5 do?\u003cbr\u003eA: It switches an AC load (12–140 VAC, up to 3 A) on and off from a 5 VDC logic signal, with optical isolation between the logic and power sides.\u003cbr\u003eQ: What logic voltage does it need?\u003cbr\u003eA: 5 VDC nominal, with a 4–8 VDC range. It picks up at 4 VDC and drops out at 1 VDC.\u003cbr\u003eQ: Does it have a fuse?\u003cbr\u003eA: Yes. It has a removable 4 amp fuse, installed in this unit.\u003cbr\u003eQ: What is the difference between G4OAC5 and G4OAC5A?\u003cbr\u003eA: The G4OAC5 switches 120 VAC loads (12–140 VAC). The G4OAC5A is rated for 240 VAC loads. Both use 5 VDC logic.\u003cbr\u003eQ: What is the minimum load?\u003cbr\u003eA: 20 mA. Below that, off-state leakage (5 mA RMS) can keep small loads partly energized.\u003cbr\u003e\u003cbr\u003eDISCLAIMER\u003cbr\u003eItem is used, sold as pictured. Not tested beyond visual inspection. Ships fast with tracking. 30-day returns accepted; buyer pays return shipping.\u003cbr\u003e\u003cbr\u003eLEGAL DISCLAIMER\u003cbr\u003eWe are not an authorized distributor, reseller, or representative of Opto 22. All product names, trademarks, brands, and logos are the property of their respective owners. Products are sourced from surplus inventory and are not covered by manufacturer warranties.\u003cbr\u003e\u003cbr\u003eG4OAC5, G4 OAC5, Opto 22 G4OAC5, Opto22 G4OAC5, G4OAC5A, G4OAC5MA, Opto 22 G4 output module, Opto 22 AC output module, G4 AC output module, 120VAC output module, 3 amp output module, 5V logic output module, solid state output module, SSR I\/O module, digital output module, relay module, output devices, I\/O module, Opto 22 G4 rack module, PLC output module replacement, industrial control output module, output module failed replacement, AC load not switching, Opto 22 I\/O repair\u003cbr\u003e\u003cbr\u003eThank you for shopping with American Industrial Parts Group!","brand":"Opto 22","offers":[{"title":"Default Title","offer_id":49849649365147,"sku":"OPT-G4OAC5-U","price":19.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0767\/0857\/7435\/files\/opto-22-g4oac5-ac-output-module-120vac-3a-g4-1-american-industrial-parts-group.png?v=1792386563"},{"product_id":"opto-22-idc5-dc-input-module-10-32vdc-12-32vac-5v-logic-solid-state-i-o-used","title":"Opto 22 IDC5 DC Input Module 10-32VDC 12-32VAC 5V Logic Solid State I\/O Used","description":"ITEM SPECIFICS\u003cbr\u003eBrand: Opto 22\u003cbr\u003eModel: IDC5\u003cbr\u003eMPN: IDC5\u003cbr\u003eSeries: Standard Digital I\/O\u003cbr\u003eType: Digital DC\/AC Input Module\u003cbr\u003eInput Voltage Range: 10–32 VDC or 12–32 VAC\u003cbr\u003eInput Current: 25 mA at max line\u003cbr\u003eInput Resistance: 1.5 kΩ\u003cbr\u003eInput Allowed for No Output: 1 mA \/ 3 V\u003cbr\u003eLogic Voltage: 5 VDC nominal (4.5–6 VDC range)\u003cbr\u003eLogic Supply Current: 12 mA\u003cbr\u003eControl Resistance (Rc): 220 Ω\u003cbr\u003eOutput: Transistor, 50 mA max\u003cbr\u003eOutput Voltage Drop: 0.4 V at 50 mA\u003cbr\u003eOutput Transistor Breakdown: 30 V\u003cbr\u003eTurn-On \/ Turn-Off Time: 5 ms \/ 5 ms\u003cbr\u003eIsolation: 4000 V transient, input to output\u003cbr\u003eOperating Temperature: -30°C to +70°C\u003cbr\u003eMounting: PCB pin, PB Series mounting racks\u003cbr\u003eCase Color: White (Opto 22 DC input color code)\u003cbr\u003eCertifications: UL Recognized, CSA, CE, RoHS\u003cbr\u003eCountry of Manufacture: USA\u003cbr\u003eCondition: Used\u003cbr\u003eQuantity: 1\u003cbr\u003e\u003cbr\u003eDESCRIPTION\u003cbr\u003eUsed Opto 22 IDC5 standard-series digital DC input module. It senses 10–32 VDC or 12–32 VAC and passes the signal to a 5 VDC logic system. The housing reads \"IDC5, Opto 22, Made in USA,\" with CSA, UL Recognized, CE and RoHS marks. The top carries the factory stamp \"200% TESTED AB207128BF.\" The gold pins and hold-down screw are intact. Scuffs, light marks and some dirt on the white housing, as pictured.\u003cbr\u003eThe IDC5 is an optically isolated input module. It converts field signals from proximity sensors, photo eyes, limit switches, push buttons and other 12\/24 VDC devices into a 5 VDC logic signal for a controller or PLC. Input and logic sides have 4000 V of transient isolation, and turn-on and turn-off are each 5 ms. The module plugs into Opto 22 PB Series standard I\/O mounting racks.\u003cbr\u003e\u003cbr\u003eFeatures:\u003cbr\u003eSenses 10–32 VDC or 12–32 VAC\u003cbr\u003e5 VDC logic (4.5–6 VDC range)\u003cbr\u003e4000 V transient optical isolation\u003cbr\u003e5 ms turn-on and turn-off\u003cbr\u003eTransistor output, 50 mA\u003cbr\u003e25 mA input current at max line\u003cbr\u003eHold-down screw for rack mounting\u003cbr\u003eMade in USA; UL Recognized, CSA, CE, RoHS\u003cbr\u003e\u003cbr\u003eCompatibility:\u003cbr\u003eDirect replacement for the Opto 22 IDC5 in Opto 22 PB Series standard digital I\/O mounting racks. For 15 or 24 VDC logic, use the IDC15 or IDC24. The IDC5D (fast-switching version) and IDC5G (35–60 V input) are different modules. The standard series is not interchangeable with Opto 22 G4 modules (G4IDC5) or SNAP modules, which use different form factors.\u003cbr\u003e\u003cbr\u003eQ\u0026amp;A\u003cbr\u003eQ: What does the IDC5 do?\u003cbr\u003eA: It detects a 10–32 VDC or 12–32 VAC field signal and converts it to an isolated 5 VDC logic signal.\u003cbr\u003eQ: Can it sense AC?\u003cbr\u003eA: Yes. Opto 22 rates it for 12–32 VAC as well as 10–32 VDC.\u003cbr\u003eQ: Will it work with 24 VDC sensors?\u003cbr\u003eA: Yes. 24 VDC is inside the 10–32 VDC input range.\u003cbr\u003eQ: Does it fit G4 or SNAP racks?\u003cbr\u003eA: No. The IDC5 is a standard-series module for PB Series racks.\u003cbr\u003eQ: What does the white color mean?\u003cbr\u003eA: Opto 22 color-codes its modules, and white marks DC input modules.\u003cbr\u003e\u003cbr\u003eDISCLAIMER\u003cbr\u003eItem is used, sold as pictured. Not tested beyond visual inspection. Ships fast with tracking. 30-day returns accepted; buyer pays return shipping.\u003cbr\u003e\u003cbr\u003eLEGAL DISCLAIMER\u003cbr\u003eWe are not an authorized distributor, reseller, or representative of Opto 22. All product names, trademarks, brands, and logos are the property of their respective owners. Products are sourced from surplus inventory and are not covered by manufacturer warranties.\u003cbr\u003e\u003cbr\u003eIDC5, Opto 22 IDC5, Opto22 IDC5, opto 22 idc5, Opto 22 DC input module, DC input module 24V, 10-32VDC input module, 12-32VAC input module, 5V logic input module, digital input module, I\/O module, input output devices, relay module, Opto 22 PB rack module, PB16 module, PB8 module, PB4 module, IDC15, IDC24, IDC5D, IDC5G, ODC5, opto 22 odc5, PLC input module replacement, sensor input not detecting, Opto 22 I\/O repair\u003cbr\u003e\u003cbr\u003eThank you for shopping with American Industrial Parts Group!","brand":"Opto 22","offers":[{"title":"Default Title","offer_id":49849649561755,"sku":"OPT-IDC5-U","price":9.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0767\/0857\/7435\/files\/opto-22-idc5-dc-input-module-10-32vdc-5v-logic-1-american-industrial-parts-group.png?v=1792386563"},{"product_id":"opto-22-odc5-dc-output-module-5-60vdc-3a-5v-logic-solid-state-relay-i-o-used","title":"Opto 22 ODC5 DC Output Module 5-60VDC 3A 5V Logic Solid State Relay I\/O Used","description":"ITEM SPECIFICS\u003cbr\u003eBrand: Opto 22\u003cbr\u003eModel: ODC5\u003cbr\u003eMPN: ODC5\u003cbr\u003eSeries: Standard Digital I\/O\u003cbr\u003eType: Digital DC Output Module (Solid State)\u003cbr\u003eOperating Output Voltage Range: 5–60 VDC\u003cbr\u003eMax Line Voltage: 60 VDC\u003cbr\u003eCurrent Rating: 3 A at 45°C; 2 A at 70°C\u003cbr\u003eUL Motor Load Rating: 60 VDC, 1.5 A\u003cbr\u003eOne-Second Surge: 5 A\u003cbr\u003eMax Output Voltage Drop: 1.6 V\u003cbr\u003eOff-State Leakage: 1 mA at 60 VDC\u003cbr\u003eLogic Voltage: 5 VDC nominal (8 VDC max)\u003cbr\u003eLogic Input Current: 12 mA\u003cbr\u003eControl Resistance: 220 Ω\u003cbr\u003eTurn-On \/ Turn-Off Time: 100 µs \/ 750 µs\u003cbr\u003eIsolation: 4000 V transient, input to output\u003cbr\u003eOperating Temperature: -30°C to +70°C\u003cbr\u003eDimensions: 0.6 x 1.25 x 1.7 in (15.2 x 31.8 x 43.2 mm)\u003cbr\u003eMounting: PCB pin, PB Series mounting racks\u003cbr\u003eCase Color: Red (Opto 22 DC output color code)\u003cbr\u003eCertifications: UL Recognized, CSA, CE, RoHS\u003cbr\u003eCountry of Manufacture: USA\u003cbr\u003eCondition: Used\u003cbr\u003eQuantity: 1\u003cbr\u003e\u003cbr\u003eDESCRIPTION\u003cbr\u003eUsed Opto 22 ODC5 standard-series digital DC output module that switches 5–60 VDC loads at up to 3 A with 5 volt logic. The housing reads \"ODC5, Opto 22, Made in USA,\" with CSA, UL Recognized, CE and RoHS marks. The top carries the factory stamp \"200% TESTED AA1991930I, UL MOTOR RATING 60 VDC 1.5A.\" The gold pins and hold-down screw are intact. Light handling marks, a small surface scrape on one side and a small nick on one end of the red housing, as pictured.\u003cbr\u003e\u003cbr\u003eThe ODC5 is a solid-state DC output module. It switches field loads such as solenoids, indicator lamps, small DC motors and relays from a 5 VDC logic signal, with 4000 V optical isolation between the logic and field sides. Turn-on is 100 µs and turn-off is 750 µs. The module plugs into Opto 22 PB Series standard I\/O mounting racks.\u003cbr\u003e\u003cbr\u003eFeatures:\u003cbr\u003eSwitches 5–60 VDC loads\u003cbr\u003e3 A at 45°C, 2 A at 70°C\u003cbr\u003e5 A one-second surge rating\u003cbr\u003eUL motor rating 60 VDC, 1.5 A\u003cbr\u003e5 VDC logic control, 12 mA input current\u003cbr\u003e100 µs turn-on, 750 µs turn-off\u003cbr\u003e4000 V transient optical isolation\u003cbr\u003eHold-down screw for rack mounting\u003cbr\u003eMade in USA; UL Recognized, CSA, CE, RoHS\u003cbr\u003e\u003cbr\u003eCompatibility:\u003cbr\u003eDirect replacement for the Opto 22 ODC5 in Opto 22 PB Series standard digital I\/O mounting racks. For loads up to 200 VDC, use the ODC5A. For 15 or 24 VDC logic, use the ODC15 or ODC24. The standard series is not interchangeable with Opto 22 G4 modules (G4ODC5) or SNAP modules (SNAP-ODC5-i), which use different form factors.\u003cbr\u003e\u003cbr\u003eQ\u0026amp;A\u003cbr\u003eQ: What does the ODC5 do?\u003cbr\u003eA: It switches a DC load from 5 to 60 VDC, up to 3 A, on and off from an isolated 5 VDC logic signal.\u003cbr\u003eQ: What is the difference between the ODC5 and the ODC5A?\u003cbr\u003eA: The ODC5 switches up to 60 VDC. The ODC5A switches up to 200 VDC. Both use 5 VDC logic.\u003cbr\u003eQ: Does it fit G4 or SNAP racks?\u003cbr\u003eA: No. The ODC5 is a standard-series module for PB Series racks. G4 and SNAP modules use different form factors.\u003cbr\u003eQ: Can it switch AC loads?\u003cbr\u003eA: No. It is a DC output module. For AC loads, use an Opto 22 OAC5.\u003cbr\u003eQ: What does the red color mean?\u003cbr\u003eA: Opto 22 color-codes its modules, and red marks DC output modules.\u003cbr\u003e\u003cbr\u003eDISCLAIMER\u003cbr\u003eItem is used, sold as pictured. Not tested beyond visual inspection. Ships fast with tracking. 30-day returns accepted; buyer pays return shipping.\u003cbr\u003e\u003cbr\u003eLEGAL DISCLAIMER\u003cbr\u003eWe are not an authorized distributor, reseller, or representative of Opto 22. All product names, trademarks, brands, and logos are the property of their respective owners. Products are sourced from surplus inventory and are not covered by manufacturer warranties.\u003cbr\u003e\u003cbr\u003eODC5, Opto 22 ODC5, Opto22 ODC5, odc5 datasheet, Opto 22 DC output module, DC output module 60V, 5-60VDC output module, 3 amp DC output module, 5V logic output module, solid state relay module, SSR output module, digital output module, relay module, output devices, I\/O module, Opto 22 PB rack module, PB16 module, PB8 module, PB4 module, ODC5A, ODC24, ODC15, opto 22 idc5, OAC5, PLC output module replacement, DC load not switching, solenoid output module, Opto 22 I\/O repair\u003cbr\u003e\u003cbr\u003eThank you for shopping with American Industrial Parts Group!","brand":"Opto 22","offers":[{"title":"Default Title","offer_id":49849650151579,"sku":"OPT-ODC5-U","price":19.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0767\/0857\/7435\/files\/opto-22-odc5-dc-output-module-5-60vdc-3a-1-american-industrial-parts-group.jpg?v=1792386294"},{"product_id":"opto-22-g4odc5-dc-output-module-5-60vdc-3a-5v-logic-g4-solid-state-i-o-used","title":"Opto 22 G4ODC5 DC Output Module 5-60VDC 3A 5V Logic G4 Solid State I\/O Used","description":"ITEM SPECIFICS\u003cbr\u003eBrand: Opto 22\u003cbr\u003eModel: G4ODC5\u003cbr\u003eMPN: G4ODC5\u003cbr\u003eSeries: G4\u003cbr\u003eType: Digital DC Output Module (Solid State)\u003cbr\u003eOutput Voltage Range: 5–60 VDC\u003cbr\u003eMax Line Voltage: 60 VDC\u003cbr\u003eCurrent Rating: 3 A at 45°C; 2 A at 70°C\u003cbr\u003eOne-Second Surge: 5 A\u003cbr\u003eMax Output Voltage Drop: 1.6 V\u003cbr\u003eOff-State Leakage: 1 mA at max voltage\u003cbr\u003eLogic Voltage: 5 VDC nominal (4–8 VDC range)\u003cbr\u003eLogic Pickup \/ Dropout: 4 VDC \/ 1 VDC\u003cbr\u003eLogic Input Current: 12 mA\u003cbr\u003eControl Resistance: 220 Ω\u003cbr\u003eTurn-On \/ Turn-Off Time: 100 µs \/ 750 µs\u003cbr\u003eIsolation: 4000 V transient; 1500 V for 1 minute\u003cbr\u003eOperating Temperature: -30°C to +70°C\u003cbr\u003eFuse: Removable, installed fuse marked F4A 250V\u003cbr\u003eStatus Indicator: Built-in LED\u003cbr\u003eCase Color: Red (Opto 22 DC output color code)\u003cbr\u003eCertifications: UL Recognized, CSA\u003cbr\u003eCondition: Used\u003cbr\u003eQuantity: 1\u003cbr\u003e\u003cbr\u003eDESCRIPTION\u003cbr\u003eUsed Opto 22 G4ODC5 G4 Series digital DC output module that switches 5–60 VDC loads at up to 3 A with 5 volt logic. The front reads \"G4 ODC5, Output 60 VDC 3 A, 5 Volt Logic, Opto 22,\" with CSA and UL Recognized marks. The removable fuse marked \"F4A 250V\" is installed. The red status LED, the hold-down screw and all pins are intact. Light dust, handling marks and minor scuffs on the housing, as pictured.\u003cbr\u003e\u003cbr\u003eThe G4ODC5 is a solid-state DC output module. It switches solenoids, DC relays, indicator lamps and small DC motors from a 5 VDC logic signal, with 4000 V optical isolation between the logic and field sides. Turn-on is 100 µs and turn-off is 750 µs, fast enough for pulsed and high-cycle outputs. The module plugs into Opto 22 G4 Series I\/O mounting racks.\u003cbr\u003e\u003cbr\u003eFeatures:\u003cbr\u003eSwitches 5–60 VDC loads\u003cbr\u003e3 A at 45°C, 2 A at 70°C\u003cbr\u003e5 A one-second surge rating\u003cbr\u003e5 VDC logic control (4–8 VDC range)\u003cbr\u003e100 µs turn-on, 750 µs turn-off\u003cbr\u003e4000 V transient optical isolation\u003cbr\u003eRemovable 4 A fuse, installed\u003cbr\u003eBuilt-in status LED\u003cbr\u003eHold-down screw for rack mounting\u003cbr\u003eUL Recognized, CSA\u003cbr\u003e\u003cbr\u003eCompatibility:\u003cbr\u003eDirect replacement for the Opto 22 G4ODC5 in G4 Series digital I\/O mounting racks. For 15 or 24 VDC logic, use the G4ODC15 or G4ODC24. For loads up to 200 VDC, use the G4ODC5A. The G4 series is not interchangeable with Opto 22 standard-series modules (ODC5) or SNAP modules, which use different form factors.\u003cbr\u003e\u003cbr\u003eQ\u0026amp;A\u003cbr\u003eQ: What does the G4ODC5 do?\u003cbr\u003eA: It switches a DC load from 5 to 60 VDC, up to 3 A, on and off from an isolated 5 VDC logic signal.\u003cbr\u003eQ: Does it have a fuse?\u003cbr\u003eA: Yes. It has a removable fuse, and the installed fuse is marked F4A 250V.\u003cbr\u003eQ: What is the difference between the G4ODC5 and the ODC5?\u003cbr\u003eA: Same ratings, different form factor. The G4ODC5 fits G4 racks, and the ODC5 fits standard PB-series racks.\u003cbr\u003eQ: Can it switch AC loads?\u003cbr\u003eA: No. It is a DC output module. For AC loads, use an Opto 22 G4OAC5.\u003cbr\u003eQ: What logic voltage does it need?\u003cbr\u003eA: 5 VDC nominal, with a 4–8 VDC range. It draws 12 mA.\u003cbr\u003e\u003cbr\u003eDISCLAIMER\u003cbr\u003eItem is used, sold as pictured. Not tested beyond visual inspection. Ships fast with tracking. 30-day returns accepted; buyer pays return shipping.\u003cbr\u003e\u003cbr\u003eLEGAL DISCLAIMER\u003cbr\u003eWe are not an authorized distributor, reseller, or representative of Opto 22. All product names, trademarks, brands, and logos are the property of their respective owners. Products are sourced from surplus inventory and are not covered by manufacturer warranties.\u003cbr\u003eG4ODC5, G4 ODC5, Opto 22 G4ODC5, Opto22 G4ODC5, opto 22 odc5, Opto 22 G4 output module, G4 DC output module, Opto 22 DC output module, DC output module 60V, 5-60VDC output module, 3 amp DC output module, 5V logic output module, solid state relay module, SSR output module, digital output module, relay module, output devices, I\/O module, G4ODC5A, G4ODC24, G4ODC15, G4OAC5, ODC5, PLC output module replacement, DC load not switching, solenoid output module, Opto 22 I\/O repair\u003cbr\u003e\u003cbr\u003eThank you for shopping with American Industrial Parts Group!","brand":"Opto 22","offers":[{"title":"Default Title","offer_id":49852016066715,"sku":"OPT-G4ODC5-U","price":12.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0767\/0857\/7435\/files\/opto-22-g4odc5-dc-output-module-5-60vdc-3a-g4-1-american-industrial-parts-group.png?v=1792386274"},{"product_id":"opto-22-g4idc5d-dc-input-module-2-5-28vdc-5v-logic-g4-digital-i-o-used","title":"Opto 22 G4IDC5D DC Input Module 2.5-28VDC 5V Logic G4 Digital I\/O Used","description":"ITEM SPECIFICS\u003cbr\u003eBrand: Opto 22\u003cbr\u003eMPN: G4IDC5D\u003cbr\u003eModel: G4IDC5D\u003cbr\u003eSeries: G4 Digital I\/O\u003cbr\u003eType: DC Input Module\u003cbr\u003eInput Voltage Range: 2.5–28 VDC\u003cbr\u003eLogic Voltage: 5 VDC (4.5–6 VDC)\u003cbr\u003eInput Current: 30 mA max\u003cbr\u003eTurn-On \/ Turn-Off Time: 1 ms \/ 1.5 ms\u003cbr\u003eIsolation: 4000 V transient \/ 1500 V for 1 minute\u003cbr\u003eOperating Temperature: -30 °C to +70 °C\u003cbr\u003eCase Color: White\u003cbr\u003eIndicator: LED\u003cbr\u003eCertifications: UL Recognized, CSA\u003cbr\u003eQuantity: 1\u003cbr\u003eCondition: Used\u003cbr\u003e\u003cbr\u003eDESCRIPTION\u003cbr\u003eThis is a used Opto 22 G4IDC5D G4 series digital DC input module, rated 2.5–28 VDC input with a 5-volt logic output. It was pulled from working equipment. The case shows handling marks, light scuffs and smudges. All pins and the hold-down screw are intact. The back is printed \"200% TESTED 0693 4032.\"\u003cbr\u003e\u003cbr\u003eFeatures:\u003cbr\u003eSenses DC field signals from 2.5 to 28 VDC\u003cbr\u003e5 VDC logic output (4.5–6 VDC range), 12 mA logic supply current\u003cbr\u003eFast response: 1 ms turn-on, 1.5 ms turn-off\u003cbr\u003eNo input filtering or hysteresis, which suits data-acquisition and lower-voltage sensing\u003cbr\u003eOptical isolation: 4000 V transient, 1500 V for 1 minute\u003cbr\u003eBuilt-in LED status indicator\u003cbr\u003eCaptive hold-down screw\u003cbr\u003eOperating temperature: -30 °C to +70 °C\u003cbr\u003e\u003cbr\u003eCompatibility:\u003cbr\u003ePlugs into Opto 22 G4 series I\/O mounting racks (G4PB4, G4PB8, G4PB16, G4PB24 and similar) and the Opto 22 Raspberry Pi Digital I\/O Carrier Board. It isn't interchangeable with standard-series (non-G4) or SNAP modules. It isn't a direct substitute for the G4IDC5 (10–32 VDC, filtered, 5 ms response), so confirm your application before swapping.\u003cbr\u003e\u003cbr\u003eQ\u0026amp;A\u003cbr\u003eQ: What's the difference between the G4IDC5D and the G4IDC5?\u003cbr\u003eA: The G4IDC5D accepts a lower input range (2.5–28 VDC) and switches faster (1 ms \/ 1.5 ms). It has no input filtering or hysteresis. The G4IDC5 is the general-purpose 10–32 VDC version with filtering and 5 ms response.\u003cbr\u003eQ: Will this work in a standard Opto 22 PB rack?\u003cbr\u003eA: No. It's a G4 series module and needs a G4 rack.\u003cbr\u003eQ: Is the hold-down screw included?\u003cbr\u003eA: Yes, the screw is captive in the module.\u003cbr\u003eQ: Has this been tested?\u003cbr\u003eA: It was pulled from working equipment and sold as used.\u003cbr\u003e\u003cbr\u003eDISCLAIMER\u003cbr\u003eThe item shown in the photos is the exact item you will receive. Please review all photos and the description carefully before purchasing. Specifications are given for reference; verify compatibility with your equipment before installation.\u003cbr\u003e\u003cbr\u003eLEGAL DISCLAIMER\u003cbr\u003eAmerican Industrial Parts Group is not an authorized distributor or affiliate of Opto 22. Brand names, trademarks and part numbers are used for identification purposes only. Electrical components should be installed by qualified personnel in accordance with applicable codes.\u003cbr\u003e\u003cbr\u003eg4idc5d, G4 IDC5D, Opto 22 G4IDC5D, Opto22 G4IDC5D, opto 22 g4 input module, G4 DC input module, 2.5-28 VDC input module, 5V logic input module, opto 22 digital I\/O, G4PB16 module, G4IDC5 alternative, solid state I\/O module\u003cbr\u003e\u003cbr\u003eThank you for shopping with American Industrial Parts Group!","brand":"Opto 22","offers":[{"title":"Default Title","offer_id":49856315392155,"sku":"OPT-G4IDC5D-U","price":14.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0767\/0857\/7435\/files\/opto-22-g4idc5d-dc-input-module-2-5-28vdc-5v-logic-g4-1-american-industrial-parts-group.png?v=1792442171"},{"product_id":"opto-22-g4idc5-digital-input-module-10-32vdc-12-32vac-5v-logic-g4-i-o-used","title":"Opto 22 G4IDC5 Digital Input Module 10-32VDC 12-32VAC 5V Logic G4 I\/O Used","description":"ITEM SPECIFICS\u003cbr\u003eBrand: Opto 22\u003cbr\u003eModel: G4IDC5\u003cbr\u003eMPN: G4IDC5\u003cbr\u003eSeries: G4\u003cbr\u003eType: Digital Input Module\u003cbr\u003eNumber of Input Channels: 1\u003cbr\u003eDC Input Voltage: 10–32 VDC\u003cbr\u003eAC Input Voltage: 12–32 VAC\u003cbr\u003eNominal Logic Voltage: 5 VDC\u003cbr\u003eLogic Supply Range: 4.5–6 VDC\u003cbr\u003eMaximum Input Current: 25 mA\u003cbr\u003eTurn-On Time: 5 ms\u003cbr\u003eTurn-Off Time: 5 ms\u003cbr\u003eStatus Indicator: Built-In LED\u003cbr\u003eConnection Type: Plug-In Pins\u003cbr\u003eMounting: Compatible G4 I\/O Rack\u003cbr\u003eCondition: Used\u003cbr\u003eQuantity: 1 Module\u003cbr\u003e\u003cbr\u003eDESCRIPTION\u003cbr\u003eOpto 22 G4IDC5 single-channel digital input module for interfacing field signals with a 5-volt logic system. Detects on\/off voltage signals from devices such as proximity switches, limit switches, pushbuttons, and photoelectric switches.\u003cbr\u003e\u003cbr\u003eUsed module with visible scuffs, discoloration, and surface dirt.\u003cbr\u003eMarked 10–32 VDC input and 5 Volt Logic.\u003cbr\u003eManufacturer also specifies 12–32 VAC input capability.\u003cbr\u003e\u003cbr\u003eBuilt-in LED status indicator.\u003cbr\u003ePlug-in connection pins and captive retaining screw.\u003cbr\u003eIncludes one module as pictured. Mounting rack and accessories are not included.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eCOMPATIBILITY \u0026amp; CROSS-REFERENCE\u003c\/strong\u003e\u003cbr\u003eDirect replacement for the Opto 22 G4IDC5 in G4 Series digital I\/O mounting racks. The G4IDC5D is a different module, with a 2.5–28 VDC input and faster 1 ms turn-on and 1.5 ms turn-off, so it is not a direct substitute. For 15 or 24 VDC logic systems, use the G4IDC15 or G4IDC24 instead. G4 modules do not fit Opto 22 standard-series (PB) or SNAP racks, so confirm your rack type before ordering.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eQ\u0026amp;A\u003c\/strong\u003e\u003cbr\u003eQ: What does the G4IDC5 do? A: It detects a 10–32 VDC or 12–32 VAC field signal and converts it to an isolated 5 VDC logic signal.\u003cbr\u003eQ: What is the difference between the G4IDC5 and the G4IDC5D? A: The G4IDC5D accepts 2.5–28 VDC and switches faster (1 ms on, 1.5 ms off). The G4IDC5 is the 10–32 VDC version with 5 ms response.\u003cbr\u003eQ: Will it fit a standard Opto 22 PB rack? A: No. It needs a G4 rack.\u003cbr\u003e\u003cbr\u003eDISCLAIMER\u003cbr\u003eUsed item with physical condition shown in the photographs. No claim of functional testing is made. The printed factory test marking does not establish present operating condition. Buyer is responsible for verifying voltage requirements, pin configuration, and compatibility with the intended G4 mounting rack and control system.\u003cbr\u003e\u003cbr\u003eLEGAL DISCLAIMER\u003cbr\u003eAmerican Industrial Parts Group is an independent reseller and is not an authorized distributor or representative of Opto 22. All manufacturer names, trademarks, and product designations belong to their respective owners and are used solely for identification. Manufacturer warranty coverage is not guaranteed.\u003cbr\u003e\u003cbr\u003eOpto 22 G4IDC5 digital input module, Opto22 G4 IDC5, G4-IDC5 input module, 10-32VDC input 5V logic, 12-32VAC input module, G4 series solid-state I\/O, single-channel discrete input, optically isolated input interface, plug-in G4 rack module, industrial control input module, proximity switch interface, limit switch input, photoelectric sensor input, control panel replacement module, input not detecting replacement.\u003cbr\u003e\u003cbr\u003eThank you for shopping with American Industrial Parts Group!","brand":"Opto 22","offers":[{"title":"Default Title","offer_id":49857277886619,"sku":"OPT-G4IDC5-U","price":11.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0767\/0857\/7435\/files\/opto-22-g4idc5-dc-input-module-10-32vdc-5v-logic-g4-1-american-industrial-parts-group.png?v=1792442171"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0767\/0857\/7435\/collections\/Industrial-Automation-MRO-Products-American-Industrial-Parts-Group_3b1cdf22-dc96-48d4-a1cc-5060311b9c34.png?v=1792386602","url":"https:\/\/americanindustrialpartsgroup.com\/collections\/opto-22.oembed","provider":"American Industrial Parts Group","version":"1.0","type":"link"}