1
/
of
17
Allen-Bradley 25B-D6P0N104 PowerFlex 525 3HP 2.2kW 480V 6A AC Drive VFD Used
Allen-Bradley 25B-D6P0N104 PowerFlex 525 3HP 2.2kW 480V 6A AC Drive VFD Used
Regular price
$279.99 USD
Regular price
Sale price
$279.99 USD
Shipping calculated at checkout.
1 in stock
Couldn't load pickup availability
ITEM SPECIFICS
Brand: Allen-Bradley
MPN: 25B-D6P0N104
Series: PowerFlex 525
Model: PowerFlex 525 AC Drive
Type: Variable Frequency Drive (VFD)
Hardware Series: A
Firmware: FRN 4.001
Frame Size: A
Power Rating: 2.2 kW / 3 HP (Normal Duty and Heavy Duty)
Input: 3 Phase, 380-480 V AC, 47-63 Hz
Input AC Voltage Range: 323-528 V AC
Output: 3 Phase, 0-460 V AC
Output Frequency: 0-600 Hz (per nameplate)
Continuous Output Current: 6.0 A
60 Sec Overload Current: 9.0 A
Short Circuit Current Rating: 100 kA
EMC Filter: None
Enclosure: IP20 / UL Open Type
Ambient Rating: -20°C to 50°C (IP20 Open Type)
Communications: Embedded EtherNet/IP, DSI (RJ45)
Programming Port: USB
Braking: Brake IGBT Included
Safety: Safe Torque Off Inputs (S1, S2, S+)
Digital Inputs: Stop, Start/Run FWD, Dir/Run REV, Digital In 1-4 (In 3 selectable as pulse input)
Analog Inputs: 0-10 V (bipolar ±10 V), 4-20 mA
Analog Output: 0-10 V or 0-20 mA (jumper selectable)
Relay Outputs: Relay 1 (N.O.), Relay 2 (N.C.)
Opto Outputs: 2
Human Interface: Integral Keypad, LCD Display, Speed Potentiometer
Approvals: cULus Listed, CE, TÜV Rheinland FS, RCM, EAC, KC, ATEX
Wire Range: 18-10 AWG (0.8-5.3 mm²)
Terminal Torque: 1.96 Nm (17.4 in-lb)
Date of Manufacture: October 31, 2015
Country of Manufacture: China
Quantity: 1
Condition: Used
DESCRIPTION
Allen-Bradley 25B-D6P0N104 PowerFlex 525 AC drive, rated 2.2 kW / 3 HP at 380-480 V AC three-phase input with 6.0 A continuous output. The photographed unit's nameplate reads Cat No. 25B-D6P0N104, Series A, FRN 4.001, manufactured October 31, 2015. The unit is clean, with the front cover, keypad and potentiometer, control terminal blocks, and power terminal area shown in the photos. The keypad and housing show only light handling marks; see photos.
Features:
Frame A, IP20 / UL Open Type drive rated 2.2 kW / 3 HP Normal and Heavy Duty.
380-480 V AC three-phase input, 0-460 V three-phase output.
6.0 A continuous output current, 9.0 A for 60 seconds.
Embedded EtherNet/IP port plus DSI RJ45 port.
USB port for configuration.
Safe Torque Off inputs (S1, S2, S+).
Brake IGBT included for dynamic braking with an external resistor.
Seven digital inputs, two analog inputs, one analog output, two relay outputs, and two opto outputs.
Integral keypad with LCD display and speed potentiometer.
V/Hz, sensorless vector, economizer, and vector motor control modes.
Class 10 electronic motor overload protection.
100 kA short circuit current rating.
Compatibility:
Direct replacement for Allen-Bradley 25B-D6P0N104 PowerFlex 525 drives in 480 V, 3 HP applications. Works with Rockwell Automation Studio 5000 / Logix controllers over EtherNet/IP and with Connected Components Workbench for setup. Replacement option for an equal-rated PowerFlex 525 Frame A drive; confirm voltage, HP, filter, and communication requirements before substituting a different 25B catalog number.
Q&A:
Q: What voltage does this drive accept?
A: 3-phase 380-480 V AC, 47-63 Hz, with an AC voltage range of 323-528 V.
Q: Will this run a 3 HP 480 V motor?
A: Yes. It is rated 2.2 kW / 3 HP with 6.0 A continuous output at 380-480 V input.
Q: Does it have built-in EtherNet/IP?
A: Yes. The PowerFlex 525 has an embedded EtherNet/IP port and a DSI RJ45 port.
Q: Does it have Safe Torque Off?
A: Yes. Safe Torque Off inputs S1, S2, and S+ are on the control terminal block.
Q: Does it have a built-in EMC filter?
A: No. The N104 suffix indicates no filter.
Q: Has it been tested?
A: No. It is sold used, as shown in the photos.
Troubleshooting:
Confirm 380-480 V AC three-phase supply at the input terminals.
The STOP input (terminal 01) must be active for the drive to start.
Check that Safe 1 and Safe 2 are jumpered to Safe +24 if Safe Torque Off is not used.
Set the sink/source jumper to match your digital input wiring.
Wait 3 minutes after removing power before servicing.
DISCLAIMER
Please review all photos and specifications before purchasing, and make sure this part is right for your application. Item is sold as shown in the photos.
LEGAL DISCLAIMER
American Industrial Parts Group is not an authorized distributor, reseller, or representative of Allen-Bradley. All product names, trademarks, brands, and logos are the property of their respective owners and are used for identification purposes only. As an independent reseller, the original manufacturer warranty does not apply.
25B-D6P0N104, 25B D6P0N104, 25BD6P0N104, Allen-Bradley 25B-D6P0N104, PowerFlex 525 25B-D6P0N104, Allen-Bradley PowerFlex 525, PowerFlex 525, PowerFlex 525 AC drive, PowerFlex 525 3HP, 3 HP 480V VFD, 2.2kW AC drive, 480V variable frequency drive, EtherNet/IP VFD, Safe Torque Off drive, Frame A PowerFlex, Rockwell Automation PowerFlex 525, PowerFlex 520 series, PowerFlex 525 fault codes, PowerFlex 525 parameters, PowerFlex 525 manual, VFD not starting replacement, motor drive fault replacement.
Thank you for shopping with American Industrial Parts Group!
Brand: Allen-Bradley
MPN: 25B-D6P0N104
Series: PowerFlex 525
Model: PowerFlex 525 AC Drive
Type: Variable Frequency Drive (VFD)
Hardware Series: A
Firmware: FRN 4.001
Frame Size: A
Power Rating: 2.2 kW / 3 HP (Normal Duty and Heavy Duty)
Input: 3 Phase, 380-480 V AC, 47-63 Hz
Input AC Voltage Range: 323-528 V AC
Output: 3 Phase, 0-460 V AC
Output Frequency: 0-600 Hz (per nameplate)
Continuous Output Current: 6.0 A
60 Sec Overload Current: 9.0 A
Short Circuit Current Rating: 100 kA
EMC Filter: None
Enclosure: IP20 / UL Open Type
Ambient Rating: -20°C to 50°C (IP20 Open Type)
Communications: Embedded EtherNet/IP, DSI (RJ45)
Programming Port: USB
Braking: Brake IGBT Included
Safety: Safe Torque Off Inputs (S1, S2, S+)
Digital Inputs: Stop, Start/Run FWD, Dir/Run REV, Digital In 1-4 (In 3 selectable as pulse input)
Analog Inputs: 0-10 V (bipolar ±10 V), 4-20 mA
Analog Output: 0-10 V or 0-20 mA (jumper selectable)
Relay Outputs: Relay 1 (N.O.), Relay 2 (N.C.)
Opto Outputs: 2
Human Interface: Integral Keypad, LCD Display, Speed Potentiometer
Approvals: cULus Listed, CE, TÜV Rheinland FS, RCM, EAC, KC, ATEX
Wire Range: 18-10 AWG (0.8-5.3 mm²)
Terminal Torque: 1.96 Nm (17.4 in-lb)
Date of Manufacture: October 31, 2015
Country of Manufacture: China
Quantity: 1
Condition: Used
DESCRIPTION
Allen-Bradley 25B-D6P0N104 PowerFlex 525 AC drive, rated 2.2 kW / 3 HP at 380-480 V AC three-phase input with 6.0 A continuous output. The photographed unit's nameplate reads Cat No. 25B-D6P0N104, Series A, FRN 4.001, manufactured October 31, 2015. The unit is clean, with the front cover, keypad and potentiometer, control terminal blocks, and power terminal area shown in the photos. The keypad and housing show only light handling marks; see photos.
Features:
Frame A, IP20 / UL Open Type drive rated 2.2 kW / 3 HP Normal and Heavy Duty.
380-480 V AC three-phase input, 0-460 V three-phase output.
6.0 A continuous output current, 9.0 A for 60 seconds.
Embedded EtherNet/IP port plus DSI RJ45 port.
USB port for configuration.
Safe Torque Off inputs (S1, S2, S+).
Brake IGBT included for dynamic braking with an external resistor.
Seven digital inputs, two analog inputs, one analog output, two relay outputs, and two opto outputs.
Integral keypad with LCD display and speed potentiometer.
V/Hz, sensorless vector, economizer, and vector motor control modes.
Class 10 electronic motor overload protection.
100 kA short circuit current rating.
Compatibility:
Direct replacement for Allen-Bradley 25B-D6P0N104 PowerFlex 525 drives in 480 V, 3 HP applications. Works with Rockwell Automation Studio 5000 / Logix controllers over EtherNet/IP and with Connected Components Workbench for setup. Replacement option for an equal-rated PowerFlex 525 Frame A drive; confirm voltage, HP, filter, and communication requirements before substituting a different 25B catalog number.
Q&A:
Q: What voltage does this drive accept?
A: 3-phase 380-480 V AC, 47-63 Hz, with an AC voltage range of 323-528 V.
Q: Will this run a 3 HP 480 V motor?
A: Yes. It is rated 2.2 kW / 3 HP with 6.0 A continuous output at 380-480 V input.
Q: Does it have built-in EtherNet/IP?
A: Yes. The PowerFlex 525 has an embedded EtherNet/IP port and a DSI RJ45 port.
Q: Does it have Safe Torque Off?
A: Yes. Safe Torque Off inputs S1, S2, and S+ are on the control terminal block.
Q: Does it have a built-in EMC filter?
A: No. The N104 suffix indicates no filter.
Q: Has it been tested?
A: No. It is sold used, as shown in the photos.
Troubleshooting:
Confirm 380-480 V AC three-phase supply at the input terminals.
The STOP input (terminal 01) must be active for the drive to start.
Check that Safe 1 and Safe 2 are jumpered to Safe +24 if Safe Torque Off is not used.
Set the sink/source jumper to match your digital input wiring.
Wait 3 minutes after removing power before servicing.
DISCLAIMER
Please review all photos and specifications before purchasing, and make sure this part is right for your application. Item is sold as shown in the photos.
LEGAL DISCLAIMER
American Industrial Parts Group is not an authorized distributor, reseller, or representative of Allen-Bradley. All product names, trademarks, brands, and logos are the property of their respective owners and are used for identification purposes only. As an independent reseller, the original manufacturer warranty does not apply.
25B-D6P0N104, 25B D6P0N104, 25BD6P0N104, Allen-Bradley 25B-D6P0N104, PowerFlex 525 25B-D6P0N104, Allen-Bradley PowerFlex 525, PowerFlex 525, PowerFlex 525 AC drive, PowerFlex 525 3HP, 3 HP 480V VFD, 2.2kW AC drive, 480V variable frequency drive, EtherNet/IP VFD, Safe Torque Off drive, Frame A PowerFlex, Rockwell Automation PowerFlex 525, PowerFlex 520 series, PowerFlex 525 fault codes, PowerFlex 525 parameters, PowerFlex 525 manual, VFD not starting replacement, motor drive fault replacement.
Thank you for shopping with American Industrial Parts Group!
Share
