ITEM SPECIFICS Brand: B&R Industrial Automation MPN: X20CP1484 Model: X20 CP 1484 Revision: J0 Series: X20 System Type: PLC CPU / Controller Processor: Celeron 266 compatible, with FPU RAM: 32 MB SDRAM User RAM: 1 MB SRAM Remanent Variables: Max. 64 kB Application Memory: CompactFlash slot (512MB industrial CF card included) Interfaces: RS232, Ethernet 10/100, POWERLINK V1/V2, 2x USB 1.1, X2X Link Modular Interface Slots: 1 Input Voltage: 24 VDC Power Consumption: 10.5 W (without memory card, interface module and USB) Cooling: Fanless Protection: IP20 Mounting: DIN Rail Battery: Renata CR2477N, 3 V lithium Country of Origin: Austria Condition: Used
DESCRIPTION B&R X20CP1484 X20 System CPU, Celeron 266 Compatible, Ethernet + POWERLINK, with 512MB Industrial CompactFlash Card. Rev. J0, Made in Austria.
Features: B&R X20 System compact controller with a Celeron 266-compatible processor, FPU and integrated I/O processor 32 MB SDRAM and 1 MB SRAM user RAM Up to 64 kB of remanent variables Typical instruction time: 0.007 µs. Shortest task class: 800 µs Nonvolatile real-time clock with 1 s resolution IF1: RS232 via the 12-pin X20 terminal block, max. 115.2 kbit/s IF2: Ethernet 10/100 Mbit/s, shielded RJ45 IF3: POWERLINK V1/V2, 100 Mbit/s, shielded RJ45 IF4 / IF5: two USB 1.1 Type A ports IF6: X2X Link master 1 modular interface slot, empty with no interface module installed Integrated power supply for the CPU, X2X Link and I/O: 24 VDC (−15% / +20%), CPU/X2X input max. 2.2 A Fanless. Operating temperature: 0 to 55°C installed horizontally, 0 to 50°C installed vertically
Housing markings: cULus Listed Ind. Cont. Eq. 14F2 cCSAus 244665 HazLoc Class I Division 2, Groups ABCD, T5 ATEX II 3G Ex nA nC IIA T5 Gc (FTZÚ 09 ATEX 0083X) CE and KC Station address switches, RUN/BOOT/DIAG mode switch, and LED status indicators (R/E, RDY/F, S/E, PLK, ETH, CF, DC)
Included (as shown in the photos): X20CP1484 CPU Gray 12-pin terminal block on the power supply section Battery cover with Renata CR2477N battery installed Swissbit 512MB Industrial CompactFlash card Condition: Used, very clean. The housing shows light handling marks. The RJ45 and USB ports, the CF slot, the bus contacts and the terminal block are clean and intact. See the photos for exact condition.
Compatibility: Direct replacement for the B&R X20CP1484 in X20 System control cabinets. Uses B&R Automation Studio for programming and works with X20 I/O modules over X2X Link and with POWERLINK networks.
Q&A Q: Is a CompactFlash card included? A: Yes. A Swissbit 512MB Industrial CompactFlash card is included, as shown in the photos. Q: Is an interface module included? A: No. The modular interface slot is empty. Q: What battery does it use? A: A Renata CR2477N, 3 V lithium. One is installed.
DISCLAIMER Please review all photos and specifications before purchasing, and make sure this part is right for your application. Item is sold as shown in the photos.
LEGAL DISCLAIMER American Industrial Parts Group is not an authorized distributor, reseller, or representative of B&R Industrial Automation. All product names, trademarks, brands, and logos are the property of their respective owners and are used for identification purposes only. As an independent reseller, the original manufacturer warranty does not apply.
X20CP1484 X20 CP 1484 CP1484 B&R X20CP1484 B&R automation B&R automation PLC B&R X20 CPU X20 system CPU B&R PLC processor Celeron 266 PLC POWERLINK CPU B&R controller automation studio B&R X20CP1484-1 alternative X20 compact CPU industrial PLC CPU
Thank you for shopping with American Industrial Parts Group!
