B&R X20CS1070 CAN Bus Interface Module 1 Mbit/s w/ X20BM11 X20TB12 X20 Used

ITEM SPECIFICS
Brand: B&R Industrial Automation
MPN: X20CS1070
Model: X20 CS 1070
Revision: E0 (I/O module), G0 (bus module)
Series: X20 System
Type: Communication Module, CAN Bus Interface
Interface: 1x CAN bus
Transfer Rate: Max. 1 Mbit/s
Max. Distance: 1000 m
CAN Controller: SJA1000
Terminating Resistor: Integrated, switchable
Isolation: CAN isolated from bus and I/O supply
Bus Module: X20BM11
Terminal Block: X20TB12, 12-pin
Protection: IP20
Mounting: DIN Rail
Country of Origin: Austria
Condition: Used

DESCRIPTION
B&R X20CS1070 X20 System CAN Bus Interface Module, 1x CAN, up to 1 Mbit/s. Complete with X20BM11 bus module and X20TB12 terminal block. Made in Austria.

Features:
Connects CAN-bus devices to the X20 system and mounts anywhere on the remote backplane like a standard X20 I/O slice
1 CAN bus interface (IF1) through the 12-pin X20TB12 terminal block:
CAN high, CAN low and CAN GND
Max. transfer rate: 1 Mbit/s. Max. distance: 1000 m
SJA1000 CAN controller
Integrated, switchable terminating resistor, with status shown on the "T" LED
CAN interface electrically isolated from the bus and the I/O power supply
Status LEDs:
r / e: operating and module status
Tx / Rx: data transfer
T: terminating resistor
Power consumption: 0.01 W (bus), 1.44 W (internal I/O)
Operating temperature: −25 to 60°C installed horizontally, −25 to 50°C installed vertically
12.5 mm pitch
Housing markings: cULus Listed Ind. Cont. Eq. 14F2 (File E115267) and CE
Included (as shown in the photos):
X20CS1070 CAN bus interface module (Rev. E0)
X20BM11 bus module (Rev. G0)
X20TB12 12-pin terminal block

Condition: Used, clean. The housings and laser markings are legible, the bus contacts are bright, and the orange locking lever is intact. There are a few small residue spots on the terminal block face and light handling marks. See the photos for exact condition.

Compatibility:
Direct replacement for the B&R X20CS1070 in X20 System I/O slices. Works with X20 bus controllers (for example the X20BC0083) and X20 CPUs over X2X Link. B&R also lists the X20BM15 bus module and the X20TB06 terminal block as alternatives. Configured in B&R Automation Studio.

Q&A
Q: Is a terminating resistor built in?
A: Yes. The terminating resistor is integrated and switchable, and the "T" LED shows its status.
Q: Are the bus module and terminal block included?
A: Yes. The X20BM11 bus module and X20TB12 terminal block are included and assembled, as shown in the photos.
Q: What is the maximum CAN speed?
A: Up to 1 Mbit/s, with a maximum distance of 1000 m.

DISCLAIMER
Please review all photos and specifications before purchasing, and make sure this part is right for your application. Item is sold as shown in the photos.

LEGAL DISCLAIMER
American Industrial Parts Group is not an authorized distributor, reseller, or representative of B&R Industrial Automation. All product names, trademarks, brands, and logos are the property of their respective owners and are used for identification purposes only. As an independent reseller, the original manufacturer warranty does not apply.

X20CS1070 X20 CS 1070 CS1070 B&R X20CS1070 X20CS1070 B&R B&R CAN bus module CAN bus interface module CAN bus module X20BM11 X20TB12 B&R automation B&R automation PLC X20 communication module X20 CAN interface X2X Link module

Thank you for shopping with American Industrial Parts Group!